| Bargeboard |
Trim work at the top of gable end walls below the soffit.
|
Top |
| Cupola |
A quadrilateral or dome-shaped ornamental structure on a home’s roof. It can be glazed or often louvered.
|
Top |
| Eave |
The edge of a roof that projects beyond the face of a wall providing protection from the elements.
|
Top |
| Fascia |
A finish board used at the ends of roof rafters and is part of the eave.
|
Top |
| Gable Roof |
A pitched roof with two sloping planes that meet at a ridge to form an inverted “V” shape. The gable roof is of the most popular roof styles in American house plans.
|
Top |
| Gambrel Roof |
A gambrel roof is a ridged roof with two slopes on either side, the lower slope having a steeper pitch than the upper. It is typical of the Dutch Colonial style home plan and frequently referred to as a “barn style” roof.
|
Top |
| Hipped Roof |
A roof comprised of four or more sloping sides that start at the same eave line.
|
Top |
| Overhang |
Part of the roof that hangs over the wall.
|
Top |
| Pediment |
The triangular portion of a gabled wall defined by the edge of the sloping roofs and the horizontal line between the eaves.
|
Top |
| Rake |
Refers to the slope of the roof at the end of a gable, where the outside part of the overhang forms an upside down V.
|
Top |
| Shed |
A shed is actually a half gable. One slopping plane is supported by walls. This usually comes off the back side or out of another roof. Shed roofs are also used over some porches.
|
Top |
| Soffit |
The underside of the roof overhang or porch ceiling that covers the rafter bottoms. This horizontal surface usually has vents to allow air into the attic.
|
Top |